Skip to main content
Dictate your search
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to replace your Home Hub 3000 modem

Internet support

Step 1 of 4

Disconnect all cables from your current modem and connect one end of the phone cable into the DSL port on the back of the new modem.

Disconnect all cables from your current modem and connect one end of the phone cable into the DSL port on the back of the new modem.Disconnect all cables from your current modem and connect one end of the phone cable into the DSL port on the back of the new modem.Disconnect all cables from your current modem and connect one end of the phone cable into the DSL port on the back of the new modem.

Step 2 of 4

If you prefer a wired connection, connect one end of the Ethernet cable to any Ethernet port on the back of the modem. Then, connect the other end of that Ethernet cable into your computerʼs Ethernet port.

If you prefer a wired connection, connect one end of the Ethernet cable to any Ethernet port on the back of the modem. Then, connect the other end of that Ethernet cable into your computerʼs Ethernet port.If you prefer a wired connection, connect one end of the Ethernet cable to any Ethernet port on the back of the modem. Then, connect the other end of that Ethernet cable into your computerʼs Ethernet port.If you prefer a wired connection, connect one end of the Ethernet cable to any Ethernet port on the back of the modem. Then, connect the other end of that Ethernet cable into your computerʼs Ethernet port.If you prefer a wired connection, connect one end of the Ethernet cable to any Ethernet port on the back of the modem. Then, connect the other end of that Ethernet cable into your computerʼs Ethernet port.If you prefer a wired connection, connect one end of the Ethernet cable to any Ethernet port on the back of the modem. Then, connect the other end of that Ethernet cable into your computerʼs Ethernet port.

Step 3 of 4

Connect one end of the power supply to the modem and the other end into a surge-protected power bar (not included).

Connect one end of the power supply to the modem and the other end into a surge-protected power bar (not included).Connect one end of the power supply to the modem and the other end into a surge-protected power bar (not included).Connect one end of the power supply to the modem and the other end into a surge-protected power bar (not included).Connect one end of the power supply to the modem and the other end into a surge-protected power bar (not included).Connect one end of the power supply to the modem and the other end into a surge-protected power bar (not included).Connect one end of the power supply to the modem and the other end into a surge-protected power bar (not included).

Step 4 of 4

Wait until all 3 LED lights on the modem are white and Fibe Internet: Connected is displayed.

Wait until all 3 LED lights on the modem are white and Fibe Internet: Connected is displayed.
  1. Disconnect all cables from your current modem and connect one end of the phone cable into the DSL port on the back of the new modem.
  2. If you prefer a wired connection, connect one end of the Ethernet cable to any Ethernet port on the back of the modem. Then, connect the other end of that Ethernet cable into your computerʼs Ethernet port.
  3. Connect one end of the power supply to the modem and the other end into a surge-protected power bar (not included).
  4. Wait until all 3 LED lights on the modem are white and Fibe Internet: Connected is displayed.