Skip to main content
Internet

How to connect the wireless network on my Connection Hub

Connect using Wi-Fi Protected Setup (WPS)

If your computer or wireless device has a Wi-Fi Protected Setup (WPS) button, you can connect to your primary wireless network quickly, without entering your Wi-Fi password.

  1. Turn on the Connection Hub and your computer or wireless device.
  2. On the Connection Hub, press and hold the WPS button image12Bil for 5-10 seconds, until the WPS light starts blinking. The Connection Hub will search for devices for 2 minutes.
  3. On your wireless device, press and hold the WPS button for 5-10 seconds. The password for your primary wireless network will automatically load onto the device and you’ll be connected to the network.

If your computer or wireless device has a Wi-Fi Protected Setup (WPS) button, you can connect to your primary wireless network quickly, without entering your Wi-Fi password.

If you have trouble connecting with WPS, or if your computer or wireless device doesn’t support it, follow the appropriate instructions to connect manually.

Guest wireless network

The Connection Hub also allows you to set up a separate guest network , if you choose, so you can provide Internet access to guests/visitors while preventing access to your primary home network. You can also limit the time the guest wireless network is active before it automatically switches off (the default is 720 minutes/12 hours).

Note: You must set up the Guest network in the Connection Hub settings. The primary wireless network must be enabled for the guest wireless network to be set up.