How to configure my mobile devices to connect to the Internet on the Bell Mobility network

1. Follow the instructions in your user guide to install a Bell SIM card into your device.
2. Turn the device on.

Note: the following instructions do not apply to Apple devices.

1. On your device, go to the Settings menu and navigate to Access Point Names.
2. Edit or create a new Access Point Name and enter the following information:
• Name: Bell Mobility
• APN: pda.bell.ca
• MMSC: http://mms.bell.ca/mms.wapenc
• MCC: 302
• MNC: 610
• APN protocol: IPv4/IPv6
• APN roaming protocol: IPv4
3. Save your changes.

For some devices, the following extra steps may be required to configure the browser settings:

1. Launch your device's Web browser.
2. Navigate to the Settings menu.
3. Under Browser Connection, select the new APN profile that you just created.
4. Enter the following information:
• Proxy server: web.wireless.bell.ca
• Port: 80
5. Save your changes.

For some devices, the following extra steps may be required to configure the MMS (Multimedia Messaging Service) settings:

1. Launch your device's Messaging app.
2. Navigate to the Multimedia Messaging settings.
3. Select the Message Centre or MMS gateway option.
4. Enter the following in the Message Centre/MMS gateway field:
• MMSC URL: http://mms.bell.ca/mms/wapenc
5. Save your changes.
6. Set the new Message Centre/MMS gateway as the "active" gateway (if required).

If you require further assistance, please contact us.

How to check your APN settings

• Please refer to your device’s user guide for instructions on how to check your APN settings.
• User guides are available for download at: bell.ca/userguides

Is your APN setting correct?

• Your default APN should be: inet.bell.ca
• If your APN is different, please see your user guide for instructions on how to change the APN settings.

Note: if you subscribe to Public - Static/Dynamic IP service or have a rural Internet plan, your APN settings may be different. Please contact us for details.