Skip to main content
Dictate your search
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to change existing wireless settings on my 2Wire 2701 modem

Internet support

Step 1 of 9

Open a web browser.

Open a web browser.

Step 2 of 9

Enter the following in the address bar:

  • When connected to the Internet, enter “ bell.ca/mymodem ”.
  • If you’re not connected, enter “ 192.168.2.1 ”.

Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”.Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”.Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”.Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”.

Step 3 of 9

Click Wireless.

Click Wireless.Click Wireless.

Step 4 of 9

Ensure wireless security is enabled.

Ensure wireless security is enabled.Ensure wireless security is enabled.

Step 5 of 9

Click the drop-down menu next to Authentication type.

Click the drop-down menu next to Authentication type.Click the drop-down menu next to Authentication type.

Step 6 of 9

Select the authentication type you require (e.g. WPA2-PSK).

Select the authentication type you require (e.g. WPA2-PSK).Select the authentication type you require (e.g. WPA2-PSK).

Step 7 of 9

You can select Use default encryption key printed on the system label.

You can select Use default encryption key printed on the system label.You can select Use default encryption key printed on the system label.

Step 8 of 9

If you prefer using your own key (password), select Set custom encryption key and specify a password.

If you prefer using your own key (password), select Set custom encryption key and specify a password.If you prefer using your own key (password), select Set custom encryption key and specify a password.

Step 9 of 9

Scroll to and click Save.

Scroll to and click Save.Scroll to and click Save.
  1. Open a web browser.
  2. Enter the following in the address bar:
    • When connected to the Internet, enter “ bell.ca/mymodem ”.
    • If you’re not connected, enter “ 192.168.2.1 ”.
  3. Click Wireless.
  4. Ensure wireless security is enabled.
  5. Click the drop-down menu next to Authentication type.
  6. Select the authentication type you require (e.g. WPA2-PSK).
  7. You can select Use default encryption key printed on the system label.
  8. If you prefer using your own key (password), select Set custom encryption key and specify a password.
  9. Scroll to and click Save.