Skip to main content
Dictate your search
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to perform a speed test from my Home Hub 2000 modem

Internet support

Step 1 of 10

Open a web browser.

Open a web browser.

Step 2 of 10

Enter the following in the address bar:

  • When connected to the Internet, enter “ bell.ca/mymodem ”.
  • If you’re not connected, enter “ 192.168.2.1 ”.

Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”.

Step 3 of 10

Scroll to the bottom and click Speed test.

Scroll to the bottom and click Speed test.Scroll to the bottom and click Speed test.Scroll to the bottom and click Speed test.

Step 4 of 10

If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.

If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.

Step 5 of 10

In the speed test page, select Block all local network activity then click Start test.

Note: This will disable your Fibe Internet and TV for the duration of the test.

In the speed test page, select Block all local network activity then click Start test.Note: This will disable your Fibe Internet and TV for the duration of the test.In the speed test page, select Block all local network activity then click Start test.Note: This will disable your Fibe Internet and TV for the duration of the test.In the speed test page, select Block all local network activity then click Start test.Note: This will disable your Fibe Internet and TV for the duration of the test.In the speed test page, select Block all local network activity then click Start test.Note: This will disable your Fibe Internet and TV for the duration of the test.In the speed test page, select Block all local network activity then click Start test.Note: This will disable your Fibe Internet and TV for the duration of the test.

Step 6 of 10

If you selected Block all local network activity, the following message will appear. Click Yes to continue with the speed test.

If you selected Block all local network activity, the following message will appear. Click Yes to continue with the speed test.If you selected Block all local network activity, the following message will appear. Click Yes to continue with the speed test.

Step 7 of 10

Wait for the speed test to be completed.

Wait for the speed test to be completed.

Step 8 of 10

Review the results…

Speed test results with Block all local network activity not selected.

Review the results…Speed test results with Block all local network activity not selected.Review the results…Speed test results with Block all local network activity not selected.

Step 9 of 10

Speed test results with Block all local network activity selected.

Speed test results with Block all local network activity selected.Speed test results with Block all local network activity selected.

Step 10 of 10

If your selected to block all local network activity, the measured download speed should be be approximately equal to the Internet service youʼre subscribed to.

Note: The test is not yet available to everyone but Bell is continuously working to make the latest technology available to all customers. The speed test in the Home Hub 2000 modem can reliably measure download speeds up to 95 Mbps and upload speeds up to 60 Mbps (these figures may be different from those shown in your user guide).

If your selected to block all local network activity, the measured download speed should be be approximately equal to the Internet service youʼre subscribed to.Note: The test is not yet available to everyone but Bell is continuously working to make the latest technology available to all customers. The speed test in the Home Hub 2000 modem can reliably measure download speeds up to 95 Mbps and upload speeds up to 60 Mbps (these figures may be different from those shown in your user guide).
  1. Open a web browser.
  2. Enter the following in the address bar:
    • When connected to the Internet, enter “ bell.ca/mymodem ”.
    • If you’re not connected, enter “ 192.168.2.1 ”.
  3. Scroll to the bottom and click Speed test.
  4. If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.
  5. In the speed test page, select Block all local network activity then click Start test.

    Note: This will disable your Fibe Internet and TV for the duration of the test.
  6. If you selected Block all local network activity, the following message will appear. Click Yes to continue with the speed test.
  7. Wait for the speed test to be completed.
  8. Review the results…

    Speed test results with Block all local network activity not selected.
  9. Speed test results with Block all local network activity selected.
  10. If your selected to block all local network activity, the measured download speed should be be approximately equal to the Internet service youʼre subscribed to.

    Note: The test is not yet available to everyone but Bell is continuously working to make the latest technology available to all customers. The speed test in the Home Hub 2000 modem can reliably measure download speeds up to 95 Mbps and upload speeds up to 60 Mbps (these figures may be different from those shown in your user guide).