Skip to main content
Internet
Log in / Register
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to configure the guest Wi-Fi network on my Home Hub 2000 modem

Internet support

Step 1 of 8

Open a web browser.

Open a web browser.

Step 2 of 8

Enter the following in the address bar:

  • When connected to the Internet, enter “ bell.ca/mymodem ”.
  • If you’re not connected, enter “ 192.168.2.1 ”.

Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”.

Step 3 of 8

Click on the Wi-Fi settings button.

Click on the Wi-Fi settings button.Click on the Wi-Fi settings button.Click on the Wi-Fi settings button.Click on the Wi-Fi settings button.

Step 4 of 8

If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.

If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.

Step 5 of 8

Go to the Guest tab.

Go to the Guest tab.Go to the Guest tab.Go to the Guest tab.Go to the Guest tab.

Step 6 of 8

Ensure the Guest Wi-Fi network is set to the ON position.

Ensure the Guest Wi-Fi network is set to the ON position.Ensure the Guest Wi-Fi network is set to the ON position.Ensure the Guest Wi-Fi network is set to the ON position.Ensure the Guest Wi-Fi network is set to the ON position.

Step 7 of 8

If you want, you can change the network name and password to something easier to remember.

Tip: You can add the word "guest" to the network name to distinguish it from your primary network.

If you want, you can change the network name and password to something easier to remember.Tip: You can add the word "guest" to the network name to distinguish it from your primary network.If you want, you can change the network name and password to something easier to remember.Tip: You can add the word "guest" to the network name to distinguish it from your primary network.If you want, you can change the network name and password to something easier to remember.Tip: You can add the word "guest" to the network name to distinguish it from your primary network.If you want, you can change the network name and password to something easier to remember.Tip: You can add the word "guest" to the network name to distinguish it from your primary network.If you want, you can change the network name and password to something easier to remember.Tip: You can add the word "guest" to the network name to distinguish it from your primary network.

Step 8 of 8

Click the Save button to save your changes.

Click the Save button to save your changes.Click the Save button to save your changes.Click the Save button to save your changes.Click the Save button to save your changes.
  1. Open a web browser.
  2. Enter the following in the address bar:
    • When connected to the Internet, enter “ bell.ca/mymodem ”.
    • If you’re not connected, enter “ 192.168.2.1 ”.
  3. Click on the Wi-Fi settings button.
  4. If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.
  5. Go to the Guest tab.
  6. Ensure the Guest Wi-Fi network is set to the ON position.
  7. If you want, you can change the network name and password to something easier to remember.

    Tip: You can add the word "guest" to the network name to distinguish it from your primary network.
  8. Click the Save button to save your changes.